1/8 INCH FEMALE TO 1/4 INCH RIGHT ANGLE MALE TRS EXTENSION CABLE 10'

Mouse over a small image to view

---

---

10 ft Headphone Extension Cable — 1/4" TRS Male to 3.5 mm (1/8") TRS Female

Give yourself room to move—without babying your cable. This 10-foot extension is purpose-built for stage and studio, especially personal monitor packs like the PM16. On one end, a 1/4" TRS male plugs into your mixer/interface/monitor amp; on the other, a 3.5 mm (1/8") TRS female accepts your in-ear monitors or standard headphones.

What makes it different

• Built like a mic cable: Made from 6 mm shielded cable (similar to microphone cable) for serious durability, crush resistance, and tangle control—way sturdier than the thin, flimsy extensions you’re used to.

• Clean, quiet signal: Twisted pair conductors with full shielding help reject noise and handling hum so your stereo mix stays clear.

• Stage-friendly length: 10 ft (3 m) gives you freedom to move without excess slack.

• Stress-reduced ends: Robust jacket and strain relief at both sides to survive real-world use.

 

Specs

• Length: 10 ft (3 m)

• Connectors: 1/4" (6.35 mm) TRS male → 3.5 mm (1/8") TRS stereo female

• Cable: 6 mm Ø, 2-conductor balanced, shielded construction (mic-cable style)

• Wiring: Stereo TRS pass-through (Tip = Left, Ring = Right, Sleeve = Ground)

 

Perfect for

• Personal monitor systems (e.g., PM16-style rigs)

• Live sound, rehearsal rooms, houses of worship

• Studio tracking, control rooms, desktop interfaces

 

Notes

• Signal remains stereo TRS end-to-end.

• Not a splitter—this extends one headphone/IEM connection.

In the box

• 10 ft 1/4" TRS male → 3.5 mm TRS female headphone extension cable (6 mm shielded build)

Tough, quiet, and ready for the road—finally, a headphone extension that’s built like your stage gear.